10 Inch Server Rack Phone Farm Rig - 6 Phones
A 4U, 10-inch rack enclosure that holds six phones on edge and a long 16-port USB hub, cooled by two 120 mm fans. Printed in ABS as four parts.
Product details
A 4U rack enclosure for a phone farm in a 10-inch server rack. Six phones stand on edge in front-loading slots, and a long 16-port USB hub sits on edge in a side bay with its end ports out a 2 in (51 mm) rear window. Two 120 mm fans mount on a slide-in fan deck and blow down over the phones. Small slots beside each fan let the fans' USB plugs drop straight to the hub. Four printed parts: the body with rack ears, the fan deck, a vented top plate, and a clip-in vented cover for the phone slots. The fan deck and the top plate slide in from the front on 45-degree rails. The deck's front clicks flush into the panel and holds the top plate in, so you can pull the fans out without taking the box out of the rack. Hexagon vents cover the floor, walls, front and top. Fits standard 10-inch racks: the panel is 254 mm (10 in) wide and 177 mm (4U) tall, with slotted ear holes 236.5 mm (9.31 in) apart for M6, 12-24 or 10-32 screws. The box is 210 mm wide and reaches 247 mm (9.7 in) behind the rack rails, so your rack needs at least that much depth; the hub's plugs stick out further at the back. Phones up to 170 x 82 x 14 mm (6.7 x 3.2 x 0.55 in) including case. The hub bay fits hubs up to about 224 x 56 x 25 mm (8.8 x 2.2 x 1 in). Printed in ABS, which stays rigid next to warm, charging phones, in black, white or gray. Fans, phones, USB hub, cables and rack screws are not included; the photos show them only for scale. It takes two standard 120 x 120 x 25 mm fans (USB fans can plug straight into the hub) and 8 fan screws.
Printed for your order, checked by hand, and shipped with tracking. See the processing estimate when you calculate shipping.
